vsftpd opsætning

i "/etc/xinetd.d"
har jeg ingen mappe der hedder vsftpd

har heller ingen fil der hedder
/etc/inetd.conf

Hvilket skulle efter jeg har læst skulle være stederne for config af port.

Nå fandt ud af rootdir er
/var/ftp

Så mangler jer bare reste.. heh

Du kan læse deres FAQ her:
ftp://vsftpd.beasts.org/users/cevans/untar/vsftpd-1.2.1/FAQ

Søg bl.a. på port, så kommer den et stykke nede

Har jeg jo læst! Se hvad jeg skriver...

--cut--
Q) Help! Can I change the port that vsftpd runs on?
A1) Yes. If you are running vsftpd in standalone mode, use the "listen_port"
directive in vsftpd.conf.
A2) Yes. If you are running vsftpd from an inetd or xinetd program, this
becomes an inetd or xinetd problem. You must change the inetd or xinetd
configuration files (perhaps /etc/inetd.conf or /etc/xinetd.d/vsftpd)
--cut--

Har nu sat følgende op i vsftp.conf

anon_world_readable_only=YES
connect_from_port_20=YES
hide_ids=YES
pasv_min_port=50000
pasv_max_port=60000

men kan stadig kun connecte fra port 21...

plz help
har prøvet alt

listen_port=port#
skal bare sættes ind og så genstart vsftpd

virker på min fedora

Nice! Virker :D

Ved du så hvad jeg skal gøre for at folk kan uploade?
Har sat alt op i config så upload er allowed, men man kan stadig ikke

Har brugerne rettigheder til at skrive i mappen ?

naeh? Har de jo nok ikke..

Hvordan får det det? Er lige startet, så ved ik så meget om det yet

Indtil videre har jeg ikke oprettet brugere, så det er bare anonymous der skal kunne skrive..

Du kan proppe alle brugerne i en gruppe, og så give gruppen skrive rettighed til mappen.

Er ikke 100% sikker på hvordan det gøres :(

Måske det her kan bruges:

# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
# Uncomment this to enable any form of FTP write command.
# write_enable=YES

Har sat det op på den måde, tror problemet ligger i:

"need to create a directory writable by the FTP user"

how?

Skrev: chmod 777 Upload
for at give skrive/læserettigheder til mappen Upload :)
nu virker det sq :)

Ok

Har du fundet ud af hvordan du opretter brugere ?

Fandt ud af, at brugerne ikke kan hente fra mappen, kun uploade til den :|
Så har stadig brug for hjælp..

Fatter ikke hvad jeg skal?

Nope har ikke lavet brugere endnu, vil først have det her til at virke

Her er min configfil:


# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are very paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
#
# Allow anonymous FTP?
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# Set a 50000-60000 port range for passive connectionds
# may enable easier firewall setup!
pasv_min_port=666
pasv_max_port=688
#
#Port
listen_port=666#
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
# chown_uploads=YES
# chown_username=root
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to tuxserv FTPserver Running RedHat Linux...
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES

pam_service_name=vsftpd
userlist_enable=YES
#enable for standalone mode
listen=YES
tcp_wrappers=YES

Har lige enablet chownmod for uploads

chown_uploads=YES

virker stadig ikke

Har sat

# chown_username=root

til
chown_username=ftp

stadig samme problem :(

fandt problemet med ftpen..
i vsftpd.conf skal jeg bruge
anon_umask=022
og ikke local_unmask=022 som er standart...