kan ikke printe ud fra Thinstation

Prøv med disse linier i config, hvis den er på parallelport:

PRINTER_0_NAME=hpdj930
PRINTER_0_DEVICE=/dev/printers/0
PRINTER_0_TYPE=P

Eller disse, hvis der er på USB:

PRINTER_0_NAME=hpdj930
PRINTER_0_DEVICE=/dev/usb/lp0
PRINTER_0_TYPE=U

Okay men er det lige meget med at det er HPDj930C For det er en USB og den hedder 930C

Min printer config ser sådan un

# --- Printing Options
#
# PRINTER_0_NAME    Workstation Printer Name, Can be Any Valid Name
# PRINTER_0_DEVICE  Workstation printer device (if not specified devices
#                    are not loaded).
#                      /dev/printers/[0-2]  for parallel ports
#                      /dev/ttyS[0-3] for serial ports
#                      /dev/usb/lp[0-2] for USB printers
#
# PRINTER_0_TYPE    N for network, P for parallel, S for serial, U for USB printer
# PRINTER_0_OPTIONS  Serial port options.
# PRINTER_1_*        See PRINTER_0_*
# PRINTER_2_*        See PRINTER_0_*
# PRINTER_3_*        See PRINTER_0_*

#PRINTER_0_NAME=parallel
#PRINTER_0_DEVICE=/dev/printers/0
#PRINTER_0_TYPE=P

#PRINTER_1_NAME=serial
#PRINTER_1_DEVICE=/dev/ttyS1
#PRINTER_1_TYPE=S
#PRINTER_1_OPTIONS="speed 38400 -imaxbel"

#PRINTER_2_NAME=hpdj930
#PRINTER_2_DEVICE=/dev/usb/lp0
#PRINTER_2_TYPE=U


R der iorden.

Og hvordan installer jeg printer i terminalen?

To use this printer, add in your server a local printer associated with
a network port; the main steps, on a W2000 server, are:

- add a new printer
- select "local" (don't select "autodetect plug & play printer")
- create a new "standard TCP/IP" type port
- next
- IP address: insert the address of the thin-client
- port type: "Hewlett Packard Jet Direct"
- next
- now select the correct printer driver, and finish...