Cisco Router Programmering

I forbindelse med en opgave i morgen, ville jeg gerne have hvis I lige gad kigge denne kommando-liste i gennem:

Configure Frame Relay:

ISP(config)#interface serial 0/0
ISP(config-if)#encapsulation frame-relay ietf
ISP(config-if)#frame-relay lmi-type ansi
ISP(config-if)#no shutdown
ISP(config-if)interface serial 0/0.101 point-to-point
ISP(config-subif)#frame-relay interface-dlci 101
ISP(config-subif)#exit
ISP(config-if)#bandwidth 64
ISP(config-if)#frame-relay map ip 192.168.1.6 101 ietf broadcast

Sydney(config)#interface serial 0/0
Sydney(config-if)#encapsulation frame-relay ietf
Sydney(config-if)#frame-relay lmi-type ansi
Sydney(config-if)#no shutdown
Sydney(config-if)interface serial 0/0.101 point-to-point
Sydney(config-subif)#frame-relay interface-dlci 101
Sydney(config-subif)#exit
Sydney(config-if)bandwidth 64
Sydney(config-if)#frame-relay map ip 192.168.1.5 101 ietf broadcast

Configure PPP:

Sydney(config)#username Auckland password cisco
Sydney(config)#interface serial 0/1
Sydney(config-if)#encapsulation ppp
Sydney(config-if)#ppp authentication chap

Auckland(config)#username Sydney password cisco
Auckland(config)#interface serial 0/0
Auckland(config-if)#encapsulation ppp
Auckland(config-if)#ppp authentication chap

Configure EIGRP:

Sydney(config)#router eigrp 101
Sydney(config-router)#network 192.168.2.0
Sydney(config-router)#network 172.16.4.0
Sydney(config-router)#network 172.16.15.0
Sydney(config-router)#eigrp log-neighbor-changes
Sydney(config-router)#ip route 0.0.0.0 0.0.0.0 192.168.1.5
Sydney(config-router)#redistribute static

Auckland(config)#router eigrp 101
Auckland (config-router)#network 192.168.2.0
Auckland (config-router)#network 172.16.4.0
Auckland (config-router)#network 172.16.15.0
Auckland (config-router)#eigrp log-neighbor-changes

Configure DHCP:

ISP(config)#ip dhcp excluded-address 10.10.0.1 10.10.0.10
ISP(config)#ip dhcp pool ISP
ISP(dhcp-config)#network 10.10.0.0 255.255.0.0
ISP(dhcp-config)#default-gateway 10.10.0.1
ISP(dhcp-config)#dns-server 10.10.0.5

Configure NAT:

ISP(config)#ip nat inside source static 10.10.0.0 192.168.100.0
ISP(config)#access-list permit ip 192.168.100.11 255.255.255.0 192.168.100.20 255.255.255.0
ISP(config)#ip nat outside source static 192.168.100.1 10.10.0.1

Configure static routes:

ISP(config)#ip route 192.168.2.0 255.255.255.252
ISP(config)#ip route 172.16.4.0 255.255.255.0
ISP(config)#ip route 172 16.15.0 255.255.255.0

Skulle der være spørgsmål om selve opgaven, spørger i bare. I første omgang vil jeg bare sikre mig at kommandoerne er rigtige!