Installering af CD drev på Compaq presario 5346 på w98

Jeg er nu helt sikker på at man godt kan komme ind i BIOS på den.
Jeg mener det er F10 eller F11 man skal trykke på de her.
Ellers må du prøve F1, F2, F10, F11, Del, Escape. De taster som normalt benyttes.

Skulle gælde for den her serie:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&lang=en&cc=us&product=93233&dlc=en&docname=bph07164

Jeg er kommet ind i bios med F10, men den er meget sparsom. De kalder den Compaq setup utility, og den viser ingenting om installerede drev.
Er der nogen ide i at prøve at opdatere bios

nej, den er som den er.

Kan du se drevet i fejlsikret tilstand?

Jeg skrev for sjov til den engelsk sprogede HP support. Her er hvad de skrev du bør prøve:

If you are missing your CD-ROM drive or the drive is not functioning try
the following instructions
to correct this problem.

Solution 1
==========

Open both the Autoexec.bat and Config.sys files in Notepad, and remove
the phrase 'rem - By Windows Setup -'. Save the file.

1) Edit Autoexec.bat in Notepad:
a) Click the 'Start' button to display the 'Start' menu.
b) Select 'Programs' and select 'Accessories'. (A submenu appears.)
c) Select 'Notepad'. (The 'Untitled - Notepad' window appears.)
d) Select the 'File' menu and select 'Open...'. (The 'Open' dialog box
appears.)
e) Type the following in the 'File name' box:
:\AUTOEXEC.BAT
(where drive is the letter of the local hard disk).
f) Click 'Open'. (The 'Autoexec.bat - Notepad' window appears.)
g) Create a backup copy of the file Autoexec.bat:
1] Select the 'File' menu and select 'Save As...'. (The 'Save As' dialog
box appears.)
2] Type the following in the 'File name' box:
:\ AUTOEXEC.BAK
(where is the letter of the local hard disk).
3] Click 'Save'. (The 'Autoexec.bak - Notepad' window appears.)
h) Locate the line with the filename Mscdex.exe.
i) If the phrase 'rem - By Windows Setup -' precedes the contents of the
line:
1] Select the words ' rem - By Windows Setup -'. (The phrase is
highlighted.)
NOTE: Windows 95 ignores any step that begins with the word 'rem' or
with ';'
2] Select the 'Edit' menu and select 'Delete'.
j) Select the 'File' menu and select 'Save As...'. (The 'Save As' dialog
box appears.)
k) Type the following in the 'File name' box:
:\AUTOEXEC.BAT
(where is the letter of the local hard disk).
l) Click 'Save'.
m) If a confirmation dialog box appears, click 'Yes'.
2) Open Config.dos in Notepad:

a) Select the 'File' menu and select 'Open...'. (The 'Open' dialog box
appears.)
b) Type the following in the 'File name' box:
:\CONFIG.DOS
(where is the letter of the local hard disk).
c) Click 'Open'. (The 'Config.dos - Notepad' window appears.)
d) Locate the line(s) with the reference /:MSCD000
(where is the letter of the CD-ROM drive).
e) Write down the contents of that line for reference.
3) Open Config.sys in Notepad:
a) Select the 'File' menu and select 'Open...'. (The 'Open' dialog box
appears.)
b) Type the following in the 'File name' box:
:\CONFIG.SYS
(where is the letter of the local hard disk).
c) Click 'Open'. (The 'Config.sys - Notepad' window appears.)
d) Create a backup copy of Config.sys:
1] Select the 'File' menu and select 'Save As...'. (The 'Save As' dialog
box appears.)
2] Type the following in the 'File name' box:
:\CONFIG.BAK
(where is the letter of the local hard disk).
3] Click 'Save'. (The 'Config.bak - Notepad' window appears.)
e) Locate the line(s) that you copied down from the Config.dos file.
f) If the phrase 'rem - By Windows Setup -' precedes the contents of the
line:
1] Select the phrase ' rem - By Windows Setup -'. (The phrase is
highlighted.)
2] Select the 'Edit' menu and select 'Delete'.
NOTE 1: If there are two lines containing /:MSCD000 (where is the letter
of the CD-ROM
drive), make sure the line that matches the one found in Config.dos is
NOT remarked out and the other
line IS remarked out.
NOTE 2: A line is remarked out if the line begins with the word 'rem' or
with ';'.
g) Select the 'File' menu and select 'Save As...'. (The 'Save As' dialog
box appears.)
h) Type the following in the 'File name' box:
:\CONFIG.SYS
(where is the letter of the local hard disk).
i) Click 'Save'.
j) If a confirmation dialog box appears, click 'Yes'.
k) Select the 'File' menu and select 'Exit' to close 'Notepad'.
4) Restart the computer:
a) Click the 'Start' button to display the 'Start' menu.
b) Select 'Shut Down...'. (The 'Shut Down Windows' dialog box appears.)
c) Select the 'Restart the computer' radio button and click 'Yes'. (The
computer restarts, using real-mode drivers.)


Solution 2
==========

The protected-mode driver for the hard disk controller was not
properly initialized when you started Windows previously. When this
occurs, a NOIDE entry is placed in the Registry, preventing Windows
from making future attempts to initialize the protected-mode driver.

To cause Windows to attempt to reinitialize the protected-mode
driver, remove the NOIDE entry from the following registry key.

HKEY_LOCAL_MACHINE\system\currentcontrolset\services\vxd\Ios

To gain access to the Registry click on Start-RUN then type in
REGEDIT and click OK. From there the Registry is a tree type setup.
Click the + sign in front of the HKEY_Local_Machine and navigate
through the rest of the listing to the NOIDE entry, highlight and
delete. Reboot and your CD-ROM will reappear and the yellow
exclamation symbols will be gone on the Primary and Secondary
IDEs.

===============

Solution 3

Use the Device Manager to install the driver for the CD-ROM drive.
In the System option in Control Panel, click the Device Manager tab.
Double-click the CD-ROM drive to display the specific device.
Double-click the device you want to configure. Or select the device, and
then click the Properties button
to view or change its settings.

To change the device driver using Device Manager
In the Device Manager, double-click the related device type.
Double-click your CD-ROM drive to display its properties.
Click the Driver tab.
The Driver properties dialog box shows the driver files and current
resource setup for that device.
Click the Change Driver button.
In the Select Device dialog box, the Show Compatible Devices option is
checked to show you a list of drivers that Windows 95
/98 has identified as compatible for your device.
Or Click Show All Devices to see a list of all your drivers avaiable in
Windows 95/98.
In the models list, select the driver you want to use, and then click
OK.
If requested, follow the instructions on the screen to provide a disk or
a path
to a directory that contains the display driver.

Tak. det var en ordentlig smøre. Jeg kan se cd drevet i enhedshåndtering, men ikke i denne computer. Siger det dig noget om, hvilken fremgangsmåde jeg skal vælge.
Under egenskaber/indstillinger er der flueben i "afbryd forbindelsen".
Aktuel tildeling af drevbogstav er F:, men reserverede drevbogstaver er E:

ok nu skal jeg lige være helt med. Du har skiftet drevet, men er du i stand til at se det nye drev i denne computer eller ej? At du snakker om F: er lidt forvirrende nu.

Tak for hjælpen. Det hjalp mig meget på vej, og problemet er nu løst. Jeg fandt en driver ved at bruge w98 startdisketten

Kan du ikke lægge et svar, så jeg kan give dig point. Du var en stor hjælp

jo selvfølgelig
takker og bukker. =)