Hvilke ramstave skal jeg købe

Du skal bruge RD ram, PC600 eller PC800.

Samsung 1 x 256 MB RD PC800 koster 450kr
http://www.edbpriser.dk/Products/Listprices.asp?ID=156565
Det er den billigste løsning jeg kan finde på edbpriser.

Fluse

The four RIMM sockets are grouped into two banks:
Bank 0 (labeled on the board as RIMM1 and RIMM2)
Bank 1 (labeled on the board as RIMM3 and RIMM4)
Bank 0 must be populated first ensuring that the RDRAM installed in RIMM1 and RIMM2 is identical in speed, size, and density. For example, the minimum system configuration would use two 64 MB RIMM modules of PC600 or PC800 RDRAM.
If the desired memory configuration has been achieved by populating Bank 0, then Bank 1 should be filled with two Continuity RIMMs.
If memory is to be installed in Bank 1, the RIMM modules installed in RIMM3 and RIMM4 must be identical in size and density to each other, and match the speed of the RIMM modules in Bank 0. The RIMM modules do not, however, need to match those in Bank 0 in size and density. For example, if Bank 0 has two 128 MB RIMMs of PC800 RDRAM, Bank 1 would require PC800 RDRAM also, however, any other supported RIMM modules such as 64 MB or 192 MB could be used.
If ECC functionality is required, all installed RIMM modules must be ECC-compliant.

Så ja... Ram skal installeres parvis.
Det vil også sige at hvis de 64mb ram klodser du har er PC600, og du fortsat vil have 2 af dem siddene i, SKAL de sidde i RIMM 1 og 2, og derefter de nye 256mb i RIMM 3 og 4. Ellers vil det ikke virker. Det vil dog betyde at de nye klodser kun kommer til at køre som PC600.

Fluse

Perfekt og hurtig svar skal udløse en bonus på 100 point :-)