Hardwarereset af Lexmark MarkNet Pro3

i følge manualen

Press and release the Menu And test buttons simunltaneously on the MarkNet to reset the print server

space, det er kun en software reset... Den nulstiller ikke til factory defaults.

Jeg har gjort det før. Det er en længere serie af \"knaptryk\" der skal til :)

oki :o)

Fandt selv en løsning:

Forced IP Address

The MarkNet Pro come with a default IP address to help you with setting up the Pro on your network. You can TELNET to that address to set the correct IP parameters. The workstation that you are going to TELNET from must be on the same subnet as the default IP address for the MarkNet Pro. You will need to temporarily change the workstations IP address to accommodate this (for instance, 157.184.8.2).

Hold down both the MENU and TEST buttons until all lights are on solid, this causes the reset function to commence.
Release only the MENU (continue to hold TEST)
Once the MENU LIGHT is on release the TEST button. The lights will change to a sweeping pattern where two lights are on simultaneously.
When this sequence starts the IP address will always be 157.184.8.1.
TELNET to the adapter and change the IP address to the address you have chosen.


NanoQ

Det var jo helt rart at se en af sværvægterne komme med spm., og endnu mere forfriskende at du selv fandt svaret og kommer med løsningen udførligt beskrevet!

Tak for det nanoq!

;o)

selv tak da ;)