Jeg får følgende fejl meddelse under WIN 98 opstart.

http://docs.us.dell.com/docs/network/intelwol/landesk.htm
Ved ikke om du kan blive klog på det her.
Jeg kan ikke.  :)

fundet på http://docs.us.dell.com/docs/network/intelwol/landesk.htm og henholder sig til Intel EtherExpress PRO/100+ Management Adapter

Setting the Correct Interrupt
During boot, the LSA works in conjunction with the system BIOS. Current versions of LSA use the 18h interrupt, while prior versions use 19h for compatibility with older BIOS chips. If your computer fails to start with LSA, you may need to manually switch the interrupt.

To see which interrupt your system is using, boot the system with LSA and look for one of the following messages:

PXE-M04: Hooking bootstrap interrupt 18h...
PXE-M04: Hooking bootstrap interrupt 19h...

To toggle between interrupts during boot, press <Ctrl> <t>. If you change the value, it will be stored in the EEPROM on the adapter and will not need to be changed again.

http://www.mmbrasil.com/solucoes/on/pxe_intel.pdf

....side 14  ;)

konklusion:
enten lige før bios opstarter skal du trykke <ctrl> + <t>, eller lige efter den er færdig med sine sager.. og så ændre værdien til det at virke på interrupt 19h

\"Canceling an LSA network boot
To cancel a network boot in progress, press <ESC> or <ctrl> + <c>. This resets the
adapter and lets the computer start-up without the LSA boot ROM.\"

Lidt mere.

men hvis man nu skal bruge boot rom\'en, så skal man nok ikke disable den.. Men det vil nok også virke. (jeg tror endda du får en hurtigere opstart, da netkortets bios så ikke skal indlæses)