aopen ax59pro

Overhovedet intet? heller ikke bios opstart.

Hvis du kan komme ind i bios, så sæt den på default values og genstart.

Hvis ikke, surt show. :(

overhovedet intet heller ingen lyde

Tjae, du kan prøve det her. Ellers skal du have fat i en ny chip, eller en med en brænder!!

Q72: What to do if the BIOS was screwed up after the flashing process?
In most cases the BIOS has to be re-programmed with a EPROM writer; you could ask your reseller for help, or contact our service center near you. But before that, you could try the following first:

Bootblock takes 8K space in the BIOS, usually it will be left intact during the flashing process. Once the flashing failed but fortunately the bootblock has not been corrupted, systems with PCI or ISA display cards will still show bootblock when booting, while those with AGP cards won't. And the floppy LED will blink at this moment. Assuming that you have saved the downloaded BIOS flash execution file (take ax6b210.exe for example) to a bootable disk, insert it into the floppy drive and type

A:\>ax6b210 /Py /Ry

then enter. For AGP users, sorry this has to be done blindly. After a while (say, one minute or so) reboot the system to see if the system could be restored. If not, perhaps the BIOS has been physically damaged or the bootblock has also been corrupted, sorry please ask for RMA service.

jeg prøver det ..

den kan slet ikke læse på dísk eller cd

det ryger over højre skulder

svar

Jamen, det har jeg skam gjort!!  ;)

Lige for en anden gangs skyld. Det skader ikke at flashe to eller tre gange inden genstart.

http://www.eksperten.dk/spm/51969