ADSL med Cisco 1605 - NAT og 6 ip'er

cisco selv har en vejledning her:
http://www.cisco.com/warp/public/556/12.html

Det er vist nedenstående i har brug for

Configuring NAT to Redirect TCP Traffic to Another TCP Port or Address
NAT Router
interface ethernet 0
ip address 172.16.10.1 255.255.255.0
ip nat inside
!-- Defines Ethernet 0 with an IP address and as a NAT inside interface.

interface serial 0
ip address 200.200.200.5 255.255.255.252
ip nat outside
!-- Defines serial 0 with an IP address and as a NAT outside interface.

ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
!-- Static NAT command that states any packet received in the inside
!-- interface with a source address of 172.16.10.8:8080 will be
!-- translated to 172.16.10.8:80.

og jo, du må gerne poste jeres foreløbige konfig

version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname kassen
!
enable secret password
!
ip subnet-zero
no ip domain-lookup
!
!
!
!
interface Ethernet0
description connected to EthernetLAN
ip address 192.168.1.1 255.255.255.0
no shut
ip nat inside
hold-queue 100 out
!
interface Ethernet1
description connected to Internet
ip address 80.197.212.6 255.255.255.252
no shut
ip nat outside
!
router rip
version 2
passive-interface Ethernet1
network 192.168.1.0
network 80.199.219.200   
no auto-summary
!
ip nat inside source list 1 interface Ethernet1 overload
ip nat inside source static tcp 192.168.1.2 23 80.199.219.201 23
ip nat inside source static tcp 192.168.1.2 25 80.199.219.201 25
ip nat inside source static tcp 192.168.1.2 80 80.199.219.201 80
ip nat inside source static tcp 192.168.1.2 110 80.199.219.201 110
ip nat inside source static tcp 192.168.1.3 23 80.199.219.202 23
ip nat inside source static tcp 192.168.1.3 25 80.199.219.202 25
ip nat inside source static tcp 192.168.1.3 80 80.199.219.202 80
ip nat inside source static tcp 192.168.1.3 110 80.199.219.202 110
ip nat inside source static tcp 192.168.1.4 23 80.199.219.203 23
ip nat inside source static tcp 192.168.1.4 25 80.199.219.203 25
ip nat inside source static tcp 192.168.1.4 80 80.199.219.203 80
ip nat inside source static tcp 192.168.1.4 110 80.199.219.203 110
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet1
no ip http server
!
access-list 1 deny host 192.168.1.2
access-list 1 deny host 192.168.1.3
access-list 1 deny host 192.168.1.4
access-list 1 permit 192.168.1.0 0.0.0.255
snmp-server community public RO
!
end

hvad var det problemet var ? :-)

Jeg giver server1 192.168.1.2 og 192.168.168.1.3 (Den skal køre IIS og en Webmail) begge på port 80.

Men med denne konfig kan serveren ikke komme på, men giver jeg den 192.168.1.10 virker det..

:)

der manglede "extendable" efter ip nat linierne..

aha :-)