Updatere sin bios

awd824b.exe fxa10c1.bin

burde da klare den fra en kommandoprompt

Der er en flash manual her:
http://www.ecs.com.tw/download/dw_spec.asp?product_id=323

Fra s. 26 af i manualen, hvis ikke det første forslag virker.

?
det forstår jeg ikke hihi
jeg har lavet en win98 start disk, skiver så A:\awd824b
så starter programet der skriver jeg igen awd824b.exe
den starter men kommer med en melding om at den bios ikke er den rigtige. hvad skal jeg så gøre??

Du skal skrive fxa10c.bin anden gang. Den første gang, er selve flash programmet.

hvordan fandt du ud af det???

Updating the BIOS
You can download and install updated BIOS for this mainboard from the manufacturer's Web site. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs. Install new BIOS as follows:
1. If your mainboard has a BIOS protection jumper, change the setting to allow BIOS flashing.

2. If your mainboard has an item called Firmware Write Protect in Advanced BIOS features, disable it. (Firmware Write Protect prevents BIOS from being overwritten.)

3. Create a bootable system disk. (Refer to Windows online help for infor-mation on creating a bootable system disk.)

4. Download the Flash Utility and new BIOS file from the manufacturer's Web site. Copy these files to the system diskette you created in Step 3.
5. Turn off your computer and insert the system diskette in your computer's diskette drive. (You might need to run the Setup Utility and change the boot priority items on the Advanced BIOS Features Setup page, to force your computer to boot from the floppy diskette drive first.)
6. At the A:\ prompt, type the Flash Utility program name and press <En-ter>. You see a screen similar to the following:


FLASH MEMORY WRITER V7.33 (C) Award Software 1999 All Rights ReservedFor (MAINBOARD NAME) DATE: 10/26/2000
Flash Type
File Name to Program :____________________
Error Message


7. Type the filename of the new BIOS in the “File Name to Program” text box. Follow the onscreen directions to update the mainboard BIOS.

8. When the installation is complete, remove the floppy diskette from the diskette drive and restart your computer. If your mainboard has a Flash BIOS jumper, reset the jumper to protect the newly installed BIOS from being overwritten.

Har flashet flere bios'er, end du har spist ærter ;)

et svar tak