Nulstille BIOS password på bærbar

Pil batteriet af et øjeblik, så glemmer den opsætningen

Du mener det lille runde batteri, der også sidder på stationære?
Hvor sidder det på en bærbar?

Det afhænger jo meget fra maskine til maskine, men hvis du alligevel har skilt den ad, burde det være til at se

Jeg har det skilt ad, men jeg kan ikke finde det.. hvor plejer det at være?

Øhh, på bundkortet...

ja tak, det havde jeg gættet.. men hvor henne ca?

Jeg fandt måske en løsning:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=tis09474
men når man klikker på linket under.. kalder den en sær primus-fil.
Nogen det ved hvad det betyder?

Måske kan det her bruges?
http://www.cgsecurity.org/?cmospwd.html

citat fra manu...

To delete an OmniBook password
If you delete an administrator password, the OmniBook automatically deletes the user
password as well.
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the Security menu.
4. Select Set Administrator Password, then press ENTER.
5. Type the current password, then press ENTER.
6. Press ENTER at the Enter New Password prompt.
7. Press ENTER at the Confirm New Password prompt.
8. Press Continue.
9. Press F10 to Save and Exit the BIOS Setup utility.

håber det virker..O)

Hvordan skal han klare punkt 5 ?

hihi.. go´pointe..

To set or change an OmniBook password
The OmniBook provides two levels of password protection—user password protection
and administrator password protection. You cannot set the user password until you set an
administrator password.
If password protection is set, then you will be prompted to enter a password whenever
you reset or turn on the computer (depending on your setting). You cannot use the
computer until you enter the correct password.
To set, change, or delete password protection for this OmniBook, use the BIOS Setup
utility.
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the Security menu.
4. Select Set Administrator Password, then press ENTER.
5. Type the new password, then press ENTER. Password length can be no longer than 8
characters, 0-9, A-Z, and cannot include special or accented characters. Passwords are
not case-sensitive.
6. Type the password again to confirm, then press ENTER.

endnu et citat..kilde >> http://h200005.www2.hp.com/bc/docs/support/SupportManual/bpi04015/bpi04015.pdf

virkede det..??

Jeps, tak