PIX 506E som router

Jeg ønsker at benytte en pix 506E som router, og har det egentligt også til at virke næsten...
Problemet er at der er en applikation der til tider "taber tråden" til klienten som sider på indersiden. Det virker som om at der sker en eller anden form for timeout, da de oplever at hvis de ikke har benyttet applikationen et stykke tid mistes forbindelsen. Efter genstart virker det igen.

Jeg håber der er en eller anden som vil øjne configurationen igennem og fortælle hvad jeg gør forkert.

Scenariet er som følger. Pixen sidder på et subnet (10.xx.12.19 som router til et andet subnet 10.xx.13.0/24

Der skal ikke laves nat, - dvs, at alle pakker til 10.xx.13.0 netværket sendes til 10.xx.12.19 som er pixens outside interface.

Før stod der en windows 2000 server og lavede routing, og det virkede perfekt.

jeg har kommenteret uc med xx nogle enkelte steder...

Result of firewall command: "show running config"

: Saved
:
PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xx encrypted
passwd xx encrypted
hostname xx
domain-name xx
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
object-group network VSAarhus
  network-object 10.XX.13.0 255.255.255.0
access-list outside_access_in permit ip any any
access-list no-nat-list permit ip any any
pager lines 24
logging on
logging trap informational
logging host outside 10.XX.8.121
icmp permit any outside
icmp permit any inside
mtu outside 1500
mtu inside 1500
ip address outside 10.XX.12.19 255.255.255.0
ip address inside 10.XX.13.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 10.XX.13.2 255.255.255.255 inside
pdm location 192.168.1.0 255.255.255.0 inside
pdm location 10.XX.2.0 255.255.255.255 outside
pdm location 10.XX.8.0 255.255.255.255 outside
pdm location 0.0.0.0 255.255.255.255 outside
pdm location 0.0.0.0 255.255.255.0 outside
pdm location 10.XX.13.0 255.255.255.0 outside
pdm location 10.XX.2.0 255.255.255.0 outside
pdm location 10.XX.8.0 255.255.255.0 outside
pdm location 10.XX.8.121 255.255.255.255 outside
pdm group xx inside
pdm logging informational 100
pdm history enable
arp timeout 14400
nat (outside) 0 access-list no-nat-list
nat (inside) 0 access-list no-nat-list
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.XX.12.19 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 10.XX.2.0 255.255.255.0 outside
http 10.XX.8.0 255.255.255.0 outside
http 192.168.1.0 255.255.255.0 inside
http 10.XX.13.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 10.XX.13.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:xx
: end