cdrdao-driver ikke fundet

Hej
Jeg forsøger at brænde bin/cue-filer på cdrom.
I k3b-brænderprogrammet får jeg fejlen at "ingen cdrdao-driver fundet". Eller - i loggen:
System
-----------------------
K3b Version: 0.11.6cvs
KDE Version: 3.2 BRANCH >= 20040204
QT Version:  3.2.3

cdrdao
-----------------------
Cdrdao version 1.1.8 - (C) Andreas Mueller <andreas@daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.8'
ATAPI:/dev/ide/host0/bus1/target0/lun0/cd: PLEXTOR CD-R  PX-W4012A Rev: 1.04
WARNING: Cannot read driver table from file "/usr/share/cdrdao/drivers" - using built-in table.
ERROR: No driver found for 'PLEXTOR CD-R  PX-W4012A', available drivers:
cdd2600
generic-mmc
generic-mmc-raw
plextor
plextor-scan
ricoh-mp6200
sony-cdu920
sony-cdu948
taiyo-yuden
teac-cdr55
toshiba
yamaha-cdr10x
For all recent recorder models either the 'generic-mmc' or
the 'generic-mmc-raw' driver should work.
Use option '--driver' to force usage of a driver, e.g.: --driver generic-mmc
ERROR: Cannot setup device ATAPI:/dev/ide/host0/bus1/target0/lun0/cd.

cdrdao comand:
-----------------------
/usr/bin/cdrdao write --device ATAPI:/dev/ide/host0/bus1/target0/lun0/cd --speed 40 -n -v 2 --eject --remote 20 /tmp/kde-root/k3bDnG9xa.tmp.cue



I konsolen får jeg flg. fejlmedd.

[root@localhost StarOffice]# cdrecord -scanbus
Cdrecord-Clone 2.01a28-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schi
lling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this versio
n.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrak
elinux-scsi-linux-sg '@(#)scsi-linux-sg.c      1.81 04/04/18 Copyright 1997 J.
Schilling').
scsibus1:
        1,0,0  100) 'PLEXTOR ' 'CD-R  PX-W4012A' '1.04' Removable CD-ROM
        1,1,0  101) *
        1,2,0  102) *
        1,3,0  103) *
        1,4,0  104) *
        1,5,0  105) *
        1,6,0  106) *
        1,7,0  107) *
[root@localhost StarOffice]# cdrdao write --device 1,0,0 --buffers 64 --eject St
ar
Star.Office.V7.Office.Suite-TDA.ShareReactor.bin
Star.Office.V7.Office.Suite-TDA.ShareReactor.cue
Star.Office.V7.Office.Suite-TDA.ShareReactor.iso
Star.Office.V7.Office.Suite-TDA.ShareReactor.nfo
[root@localhost StarOffice]# cdrdao write --device 1,0,0 --buffers 64 --eject St
ar.Office.V7.Office.Suite-TDA.ShareReactor.cue
Cdrdao version 1.1.8 - (C) Andreas Mueller <andreas@daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

ERROR: Cannot open SCSI device '1,0,0': Cannot open '/dev/sg*'
Supported SCSI transports for this platform:

Transport name:        sg
Transport descr.:      Generic transport independent SCSI
Transp. layer ind.:
Target specifier:      bus,target,lun
Target example:        1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:  not supported

Transport name:        pg
Transport descr.:      SCSI transport for ATAPI over Parallel Port
Transp. layer ind.:
Target specifier:      bus,target,lun
Target example:        1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:  not supported

Transport name:        ATA
Transport descr.:      ATA Packet specific SCSI transport
Transp. layer ind.:    ATAPI:
Target specifier:      bus,target,lun
Target example:        ATAPI:1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:  not supported

Transport name:        ATA
Transport descr.:      ATA Packet specific SCSI transport using sg interface
Transp. layer ind.:    ATA:
Target specifier:      bus,target,lun
Target example:        1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:  not supported
ERROR: Please use option '--device [path:]bus,id,lun', e.g. --device 0,6,0 or --                                          device ATAPI:0,0,0
ERROR: Cannot setup device 1,0,0.
[root@localhost StarOffice]#

i mit /usr/bin/ - direktorie ligger bl.a:
-rwxr-xr-x  1 root root      1346 mar 18  2004 /usr/bin/cdda2mp3*
-rwxr-xr-x  1 root root      1459 mar 18  2004 /usr/bin/cdda2ogg*
-rwxr-xr-x  1 root cdwriter 247340 mar 18  2004 /usr/bin/cdda2wav*
-rwxr-xr-x  1 root root      43224 nov  6  2003 /usr/bin/cddb-slave2-properties*
-rws--x--x  1 root root    561096 mar 24  2004 /usr/bin/cdrdao*
-rws--x--x  1 root root    322604 sep  2 17:20 /usr/bin/cdrecord*



Håber nogen kan være mig behjælpelig :-)
/Henrik