07. december 2004 - 15:29Der er
16 kommentarer og 1 løsning
Understøtter mit bundkort dette grafikkort?
Hej
Jeg overvejer at købe et radeon 9800 pro Excalibur. Mit bundkort er et abit i845e, kan det godt trække et sådant grafikkort, og kan det køre det i 8x agp, eller må jeg nøjedes med 4x?
Brug af AI afslører de svagheder, virksomheder allerede har opbygget gennem års cloud-transformation, nye SaaS-løsninger og fragmenterede sikkerhedssystemer.
Den skriver følg, når jeg kører SIsoftware testen:
SiSoftware Sandra
Mainboard Manufacturer : ABIT MP Support : 1 CPU(s) MPS Version : 1.40 Model : i845E-W83627HF Version : BD7II Rev:1.0 Serial Number : 6A69VA1L
System Memory Controller Location : Mainboard Error Correction Capability : None Number of Memory Slots : 2 Maximum Installable Memory : 2GB Bank0/1 - A0 : DIMM Synchronous SDRAM 512MB/64 Bank2/3 - A1 : DIMM Synchronous SDRAM 512MB/64
Chipset 1 Model : Abit Computer Corp 82845E Brookdale Host-Hub Interface Bridge (E0-step) Bus(es) : AGP PCI IMB USB FireWire/1394 i2c/SMBus Front Side Bus Speed : 4x 151MHz (604MHz data rate) Maximum FSB Speed / Max Memory Speed : 4x 133MHz / 2x 133MHz Width : 64-bit IO Queue Depth : 12 request(s)
Chipset 1 Hub Interface Type : Hub-Interface Version : 1.50 Number of Ports : 1 Width : 8-bit Full Duplex : Yes Multiplier : 1/1x
Logical/Chipset 1 Memory Banks Bank 0 : 256MB DDR-SDRAM 2.5-3-3-6CL 1CMD Bank 1 : 256MB DDR-SDRAM 2.5-3-3-6CL 1CMD Bank 2 : 256MB DDR-SDRAM 2.5-3-3-6CL 1CMD Bank 3 : 256MB DDR-SDRAM 2.5-3-3-6CL 1CMD Speed : 2x 151MHz (302MHz data rate) Multiplier : 1/1x Width : 64-bit Refresh Rate : 7.80µs Power Save Mode : No Fixed Hole Present : No
APIC 1 Version : 2.00 Multiplier : 1/2x Maximum Interrupts : 24 IRQ Handler Engaged : Yes Enhanced Support : No
Memory Module(s) Memory Module 1 : 512MB 16x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz) Memory Module 2 : 512MB 16x(32Mx8) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz)
Environment Monitor 1 Model : Winbond W83627HF ISA Version : 2.01 Mainboard Specific Support : No
Temperature Sensor(s) Board Temperature : 41.0°C / 105.8°F CPU Temperature : 42.0°C / 107.6°F td
Cooling Device(s) Auto Fan Speed Control : No CPU Fan Speed : 2813rpm
Voltage Sensor(s) CPU Voltage : 1.46V Aux Voltage : 2.53V +3.3V Voltage : 3.36V +5V Voltage : 5.13V +12V Voltage : 12.04V -12V Voltage : -8.41V -5V Voltage : -2.99V Standby Voltage : 5.09V Battery Voltage : 3.25V
AGP Bus(es) on Hub 1 Version : 2.00 Speed : 4x Multiplier : 1/2x Fast-Writes Enabled : Yes Side Band Enabled : Yes Aperture Size : 256MB
PCI Bus(es) on Hub 1 Version : 2.20 Number of Bridges : 2 PCI Bus 0 : PCI (1x PCIClk) PCI Bus 2 : PCI (1x PCIClk)
LPC Hub Controller 1 Model : Intel Corporation 82801DB (ICH4) LPC Interface Bridge ACPI Power Management Enabled : Yes Random Number Generator Enabled : No Random Number Generator Support : Yes Delayed Transaction Supported : Yes Delayed Transaction Enabled : No
USB Controller 1 Model : Abit Computer Corp 82801DB USB UHCI Controller #1 (ICH4 A1 step) Version : 1.10 Interface : UHCI Channels : 2 Speed : 48MHz Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) Legacy Emulation Enabled : No
USB Controller 2 Model : Abit Computer Corp 82801DB USB UHCI Controller #2 (ICH4 A1 step) Version : 1.10 Interface : UHCI Channels : 2 Speed : 48MHz Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) Legacy Emulation Enabled : No
USB Controller 3 Model : Abit Computer Corp 82801DB USB UHCI Controller #3 (ICH4 A1 step) Version : 1.10 Interface : UHCI Channels : 2 Speed : 48MHz Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) Legacy Emulation Enabled : No
USB Controller 4 Model : Abit Computer Corp 82801DB USB EHCI Controller (ICH4 A1 step) Version : 2.00 Specification : 1.00 Interface : EHCI Channels : 6 Companion Controllers : 3 Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps) Addressing Support : 64-bit Legacy Emulation Enabled : No
FireWire/1394 Controller 1 Model : Creative Labs Audigy 2 Firewire Controller Version : 1.10 Interface : OHCI Enhanced Support : No Channels : 64 Speed : 400MHz
System SMBus Controller 1 Model : Intel 801xx SMBus Version : 0.01 Slave Device Enabled : Yes Speed : 16kHz
Expansion Slot(s) PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (Intel Corporation 82845E Brookdale Host-AGP Bridge (E0-step)) PCI1 (2h) : PCI 32-bit +5V PME Full-Length Available PCI2 (3h) : PCI 32-bit +5V PME Full-Length Available PCI3 (4h) : PCI 32-bit +5V PME Full-Length Used PCI4 (5h) : PCI 32-bit +5V PME Full-Length Used AGP (8h) : AGP 32-bit +5V Full-Length Used (CardExpert Technology GeForce4 Ti 4600 [NV25.1])
Port Connector PRIMARY IDE : None - ATA / None SECONDARY IDE : None - ATA / None FDD : 8251 FIFO - Floppy Disk / None COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female Keyboard : Keyboard - None / PS/2 PS/2 Mouse - Detected : Mouse - PS/2 / PS/2 USB : USB - None / None
Performance Tips Notice 224 : SMBIOS/DMI information may be inaccurate. Warning 2507 : Mainboard has too few memory slots. Upgrading the memory may be difficult or expensive. Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive. Warning 2541 : FSB exceeds Chipset rated speed. Reduce FSB. Warning 2542 : Memory bus speed exceeds Chipset rated speed. Reduce FSB/memory multiplier. Warning 2545 : Large memory modules should be Registered/Buffered. Tip 2546 : Large memory modules should be ECC/Parity. Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
skal have åbnet min computer før jeg kan se det, og den er gemt godt inde i en kasse, så det gør jeg lidt senere. Hvad er minimum størrelsen på strømforsyningen for at den kan trække et 9800?
Tilladte BB-code-tags: [b]fed[/b] [i]kursiv[/i] [u]understreget[/u] Web- og emailadresser omdannes automatisk til links. Der sættes "nofollow" på alle links.
Ny bruger
Nybegynder
Opret
Preview
