Avatar billede krydset Nybegynder
20. januar 2005 - 22:44 Der er 6 kommentarer og
2 løsninger

computer genstarter

Hejsa. er lige kommet hjem fra en kammerat der et underligt problem med sin pc, i går aftes virkede den perfekt, men da han skulle starte den idag genstarter den hele tiden. den genstarter lige inden den skal til at indlæse windows. den skriver noget med building dmi pool.................og så kommer der denne text "protected flash rom" og efter 10 sec genstarter den. Er der nogen der har noget bud på hvad det kan være....

Mit bud er at bundkortet er defekt.
Mvh Thomas
Avatar billede dragonknight Juniormester
20. januar 2005 - 23:23 #1
Method One:

Apply power to the computer.
Access the system BIOS.
Set the drive type as None or Not Installed.
Then Load the BIOS Defaults
Then Load the SETUP Defaults
Save the BIOS changes and reboot the PC to a System Boot Diskette.
Shut down the PC after the memory count is displayed.
Reconnect the power and interface cables to the hard drive.
Access the System BIOS.
Auto-Detect the hard drive. Ensure that the LBA Mode option is enabled.
Save the BIOS changes and restart the PC with a System Diskette.
Partition and format the hard drive via the operating system.
Restart the system. On boot, the screen should read:

Verifying DMI Pool Data
Update Successful
The system should continue booting normally.

Method Two:

Apply power to the computer.
Access the System BIOS.
Disable both the Internal and External CPU Cache. These features are located in either the "BIOS Features" or "Advanced Settings" options of the BIOS Setup.
NOTE: Consult the System or Motherboard User's Manual for exact location of the Internal and External CPU Cache settings.
Save the BIOS changes and restart the PC to a System Boot Diskette. On startup, the screen should read:
Verifying DMI Pool Data
Update Successful
The system should continue booting normally.

After the system successfully boots, re-start the PC and access the system BIOS.
Enable the External CPU Cache. This feature is located in the "BIOS Features" or "Advanced Settings".
NOTE: Consult the System or Motherboard User's Manual for exact location of the External CPU Cache setting.
! WARNING ! User's MUST re-enable this feature after resolving the problem for optimal system performance.
Save the BIOS changes and restart the PC to a System Boot Diskette. On startup, the screen should read:

Verifying DMI Pool Data
Update Successful
The system should continue booting normally.
Avatar billede lars_hoeberg Praktikant
21. januar 2005 - 01:03 #2
Kunne godt lyde som en ram-fejl. Hvis han har 2 ram-blokke i, prøv da at pille det ene ud. Er fejlen der stadig, så prøv med det andet ram-modul.
Avatar billede dragonknight Juniormester
21. januar 2005 - 01:12 #3
1 Corrupt boot files on the computer.
2 Settings for hard disk drive are not correct.
3 Floppy diskette or CD in computer causing issue.
4 Boot devices not set properly.
5 BIOS corrupt or misc. setting not set properly.
6 Connections loose or disconnected.
7 Bad Hard disk drive or other bad hardware.
Avatar billede krydset Nybegynder
21. januar 2005 - 09:29 #4
Hmmm det vil jo næsten sige det kan være alt. Jeg sender det her vidre til ham tak indtil videre
Avatar billede krydset Nybegynder
21. januar 2005 - 09:30 #5
vi har kun 1 x 512 blok i :-(
Avatar billede dragonknight Juniormester
21. januar 2005 - 12:48 #6
Min procedure tager hånd om de første 5, så der er bare 6 og 7 tilbage.
Avatar billede dragonknight Juniormester
31. januar 2005 - 00:15 #7
Er du kommet videre ? ? ?
Avatar billede krydset Nybegynder
31. januar 2005 - 09:18 #8
Ja undskyld... har ikke fået svaret, der blev reinstalleret windows og så virkede det tilsyneladende fint.
Avatar billede Ny bruger Nybegynder

Din løsning...

Tilladte BB-code-tags: [b]fed[/b] [i]kursiv[/i] [u]understreget[/u] Web- og emailadresser omdannes automatisk til links. Der sættes "nofollow" på alle links.

Loading billede Opret Preview
Kategori
IT-kurser om Microsoft 365, sikkerhed, personlig vækst, udvikling, digital markedsføring, grafisk design, SAP og forretningsanalyse.

Log ind eller opret profil

Hov!

For at kunne deltage på Computerworld Eksperten skal du være logget ind.

Det er heldigvis nemt at oprette en bruger: Det tager to minutter og du kan vælge at bruge enten e-mail, Facebook eller Google som login.

Du kan også logge ind via nedenstående tjenester