GPRS internet over Bluwtooth med T610

Har fulgt denne guide http://olberger.club.fr/btgprsfisio820orangefr.html#id2488421

men når jeg kører pppd file /etc/ppp/gprs går det ikke helt som forventet


Press CTRL-C to close the connection at any stage!
defining PDP context...
rATZ
OK
AT&F
OK
ATV1E0S0=0&D2&C1
OK

OK

OK
waiting for connect...


CONNECT
Connected.
If the following ppp negotiations fail,
try restarting the phone.

Serial connection established.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8935f7ca> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
No auth is possible
sent [LCP ConfRej id=0x1 <auth pap>]
rcvd [LCP ConfRej id=0x1 <magic 0x8935f7ca>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
sent [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x0]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP CodeRej id=0x4 09 00 00 08 00 00 00 00]
LCP: Rcvd Code-Reject for code 9, id 0
rcvd [LCP ProtRej id=0x5 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
rcvd [IPCP ConfReq id=0x1]
sent [IPCP ConfNak id=0x1 <addr 0.0.0.0>]
rcvd [IPCP ConfRej id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x2 <addrs 0.0.0.0 0.0.0.0>]
rcvd [IPCP ConfReq id=0x2 <addr 0.0.0.0>]
sent [IPCP ConfRej id=0x2 <addr 0.0.0.0>]
rcvd [IPCP ConfRej id=0x2 <addrs 0.0.0.0 0.0.0.0>]

[SNIP] <Rigtig mange af overstående/nedenstående linjer>

rcvd [IPCP ConfRej id=0xfb <addrs 0.0.0.0 0.0.0.0>]
sent [IPCP ConfReq id=0xfc <addrs 0.0.0.0 0.0.0.0>]
rcvd [IPCP ConfRej id=0xfc <addrs 0.0.0.0 0.0.0.0>]
sent [IPCP ConfReq id=0xfd <addrs 0.0.0.0 0.0.0.0>]
Terminating on signal 2.
sent [LCP TermReq id=0x3 "User request"]
rcvd [IPCP ConfRej id=0xfd <addrs 0.0.0.0 0.0.0.0>]
Discarded non-LCP packet when LCP not open
rcvd [LCP TermAck id=0x3]
Connection terminated.

Sending break to the modem

PDP context detached
Serial link disconnected.


det bliver den ved med til jeg trykker CTRL+C