Det er på engelsk, men jeg tror det er ment at finde ud af.
Enten kan du følge beskrivelsen eller klikke på linket.
http://www.helpwithpcs.com/upgrading/change-irq-settings.htm.......................
To view your current IRQ assignments you can open Device Manager.
Click on START, click on CONTROL PANEL.
Click on Performance and Maintenance.
Click on System.
Click on the Hardware tab.
Click the DEVICE MANAGER button.
Once you have Device Manager open, select VIEW from the toolbar menu and then click Resources by Type.
Double click on Interrupt Request (IRQ) as seen in fig 1.1 below:
The list that appears on your machine will vary depending on the hardware you have.
If you are experiencing problems with a newly installed/configured piece of hardware and the drivers are installed correctly then check to see if it has its own IRQ channel.
--------------------------------------------------------------------------------
back to top | © Copyright 2001-2007 helpwithpcs.com
--------------------------------------------------------------------------------
Changing IRQ Settings
--------------------------------------------------------------------------------
Warning: Changing system resources such as IRQ channels can result in your computer not functioning correctly, always make a note of the settings before you change anything so you can restore them back if required.
--------------------------------------------------------------------------------
If you do have a conflict and need to change an IRQ setting:
Right click on the device in the list (see above) and then select properties.
Click the Resources tab.
Remove the tick from the Use automatic settings option.
Select a non-conflicting configuration from the pull down box.
Click OK
You may find you cannot manually change your IRQ settings (the Use automatic settings will be greyed out), this is usually related to the ACPI function used by Win XP.
To resolve conflicts with PCI or ISA cards try manually setting them in your motherboard's BIOS or try a different slot for the newly installed device, you will usually find that by changing the slot you will change the IRQ channel as well.
