Lydkort og linux mandrake 8.1

prøv at skrive "modprobe sb io=0x200 irq=5 dma=1 dma16=3". Hvis det ikke dur, så vis lige, hvad de sidste par linier fra kommandoen dmesg siger..

jeg har skrevet forkert mht io=200, det skulle være 220.
så jeg har prøvet :
modprobe sb io=0x220 irq=5 dma=1 dma=3
dog får jeg flg. meddelse : (jeg kan ikke lige kopiere fra min terminal)

Øhh.. Kan du så ikke selv taste det ind? Eller køre kommandoen i en xterm og så kopiere derfra (skift til root med "su -", hvorefter du skal indtaste root passwordet og kører kommandoen ovenfor).

iflg. win. enhedshåntering :  i/o 0220-022F, i/o 0388-038F, i/o 0534-0537, IRQ=05, DMA=01, DMA=03.

kørere jeg så /usr/sbin/sndconf ; så får jeg valgmuligherderne : I/U port 0x530 el. 0x534, IRQ 5 el. 7 ; DMA 0,1 el.3 DMA 0,1 el 3.
så jeg vælger : i/o = 534, IRQ=5, DMA=1 & DMA=3.
men aligevel,
får jeg følgende fejlmeddelse:
/lib/modules/2.4.8-26_mdk/kernel/drivers/sound/aa1848.o.gz :
init_modules : No such device
/lib/modules/2.4.8-26_mdk/kernel/drivers/sound/aa1848.o.gz :
insmod /lib/modules/2.4.8-6_mdk/kernel/drivers/sound/aa1848.o.gz :
faield
/lib/modules/2.4.8-26_mdk/kernel/drivers/sound/aa1848.o.gz :
insmod sound-slot-0 faield.

Hvilken fejl fik du, da du skrev det, jeg sendte til dig?

Hvad står der i /proc/pci om dit lydkort?

Jeg skrev som root : modprobe sb io=0x220 irq=5 dma=1 dma=3
(kan det passe jeg skal skrive dma16=3, istedet for dma=3 ??)
blot for at se jeg kom tilbage til prompten!!

uanset hvad jeg skriver. med modprobe,  jeg har prøvet de foskellige muligheder, får jeg fejl som minder meget om den, jeg har pastet ind tideligere !! ??

Skriver jeg som root /proc/pci, får jeg "Adgang nægtet" ???????(mystisk)

Du skal skrive "cat /proc/pci"..

OK skriver jeg "cat /proc/pci", som root kommer der lidt frem om mine kort, men jeg kan ikke gendkende noget fra mit lydkort.

Men vil du gerne have at jeg skriver det nem som kommer frem ??

Jeg har siden fået installeret Mandrake 9.0 !!
men problemet er stadig det samme ingen lyd ?
udskrift fra dmesg :

Linux version 2.4.19-16mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000004800000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
72MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 18432
zone(0): 4096 pages.
zone(1): 14336 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount
No local APIC present or hardware disabled
Initializing CPU#0
Detected 120.275 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 240.02 BogoMIPS
Memory: 70440k/73728k available (1176k kernel code, 2904k reserved, 444k data, 136k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 000001bf 00000000 00000000, vendor = 0
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After vendor init, caps: 000001bf 00000000 00000000 00000000
CPU:    After generic, caps: 000001bf 00000000 00000000 00000000
CPU:            Common caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfb330, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST31720A, ATA DISK drive
hdb: Maxtor 71336 A, ATA DISK drive
hdc: CDA66802ISE, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 3329424 sectors (1705 MB), CHS=825/64/63, DMA
hdb: 2616240 sectors (1340 MB) w/64KiB Cache, CHS=648/64/63, DMA
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
/dev/ide/host0/bus0/target1/lun0: p1
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 52k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
Adding Swap: 138560k swap-space (priority -1)
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
SB 3.01 detected OK (220)
sb: Interrupt test on IRQ5 failed - Probable IRQ conflict
SB DSP version is just 3.01 which means that your card is
several years old (8 bit only device) or alternatively the sound driver
is incorrectly configured.
fealnx.c:v2.51 Nov-17-2001
eth0: 100/10M Ethernet PCI Adapter at 0x6000, 00:02:44:60:4f:98, IRQ 11.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdc: ATAPI 6X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
udf: registering filesystem
end_request: I/O error, dev 02:00 (floppy), sector 0
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
ide-floppy driver 0.99b
udf: bad mount option "codepage=850"
Unable to identify CD-ROM format.
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850