SciptLogic !

Step 4 Step = Trinvis guide

http://support.scriptlogic.com/ScriptLogic/Std/main.htm

Jeg tænkte lige at der måske var nogen der kunne ud over at fortælle mig lidt, også kunne fortælle mig hvordan denne fil skal laves til en bat eller cmd fil:

; SLCONFIG.KIX
; Version 2.51
; (C)1997-2000 Inteletek, Inc.


;[General]
$DontDisplayLastUserName=\'1\'
$PromptPurgeTempMonthly=\'-1\'
$PurgeTempFspec=\'*.tmp;*.gif;*.jpg;*.htm;*.html\'
$LowDiskSpaceMbWarn=\'0\'
$PromptPwdExpireDays=\'0\'
$MaxLogonDrive=\'E\'
$EOSmessage=\'HEJZA\'
$NoRpcWarning=\'0\'
$WarningContactText=\'Kontakt venligst Kristian el. Frank\'

;[Display]
$RemoveFindFastStartup=\'1\'
$RenameNetHood=\'Andre computere\'
$RenameMyComputer=\'Denne computer\'
$RemoveShortcutTo=\'0\'
$RemoveWinWelcome=\'1\'
$RemoveMouseTips=\'1\'
$RemoveMSNicon=\'0\'
$AddDosPromptHere=\'0\'
$RemoveMsnIcon=\'1\'
$RemoveMyDocIcon=\'1\'
$RemoveOlsIcon=\'0\'
$WallpaperFile=\'\'
$SaveNtKbState=\'1\'
$DisableNTPrintPopup=\'1\'
$NTLegalCaption=\'\'
$NTLegalText=\'\'


;[TimeSync]
$nTimeSource=\'0\'
$TimeSource1=\'*,*,*,\\\\NT_SINE\'
$TimeSource2=\'\'
$TimeSource3=\'\'
$TimeSource4=\'\'
$TimeSource5=\'\'
$TimeSource6=\'\'
$TimeSource7=\'\'
$TimeSource8=\'\'
$TimeSource9=\'\'
$TimeSource10=\'\'

;[Drives]
$nD=\'2\'
$D1=\'Elever,NT ,LAN ,E,No,\\\\NT_SINE\\Elever 2000-2001\'
$D2=\'Elever,NT ,LAN ,F,No,\\\\NT_SINE\\Mp3\'
$D3=\'\'
$D4=\'\'
$D5=\'\'
$D6=\'\'
$D7=\'\'
$D8=\'\'
$D9=\'\'
$D10=\'\'

;[Path]
$nS=\'0\'
$S1=\'\'
$S2=\'\'
$S3=\'\'
$S4=\'\'
$S5=\'\'
$S6=\'\'
$S7=\'\'
$S8=\'\'
$S9=\'\'
$S10=\'\'

;[Printers]
$nP=\'0\'
$P1=\'\'
$P2=\'\'
$P3=\'\'
$P4=\'\'
$P5=\'\'
$P6=\'\'
$P7=\'\'
$P8=\'\'
$P9=\'\'
$P10=\'\'

;[Environment]
$nEnv=\'0\'
$Env1=\'\'
$Env2=\'\'
$Env3=\'\'
$Env4=\'\'
$Env5=\'\'
$Env6=\'\'
$Env7=\'\'
$Env8=\'\'
$Env9=\'\'
$Env10=\'\'

;[ShellFolders]
$nSF=\'0\'
$SF1=\'\'
$SF2=\'\'
$SF3=\'\'
$SF4=\'\'
$SF5=\'\'
$SF6=\'\'
$SF7=\'\'
$SF8=\'\'
$SF9=\'\'
$SF10=\'\'

;[NTCommonShellFolders]
$nNTCSF=\'0\'
$NTCSF1=\'\'
$NTCSF2=\'\'
$NTCSF3=\'\'
$NTCSF4=\'\'
$NTCSF5=\'\'
$NTCSF6=\'\'
$NTCSF7=\'\'
$NTCSF8=\'\'
$NTCSF9=\'\'
$NTCSF10=\'\'

;[MSOffice]
$nMsOff=\'0\'
$DisableOfficeAssistant=\'-1\'
$LiveScrolling=\'0\'
$nMSOFF=\'0\'
$MSOFF1=\'\'
$MSOFF2=\'\'
$MSOFF3=\'\'
$MSOFF4=\'\'
$MSOFF5=\'\'
$MSOFF6=\'\'
$MSOFF7=\'\'
$MSOFF8=\'\'
$MSOFF9=\'\'
$MSOFF10=\'\'

;[Updates]
$NTAntiVirusUpdate=\'\'
$95AntiVirusUpdate=\'\'
$CsdUserName=\'\'
$CsdPassword=\'\'
$CsdDomainName=\'\'
$CsdCmdLineParams=\'-u -f -n\'
$nCSD=\'0\'
$CSD1=\'\'
$CSD2=\'\'
$CSD3=\'\'
$CSD4=\'\'

;[Policies]
$ClearPolFirst=\'0\'
$PolicyExemptGroup=\'Administrators\'
$nPol=\'8\'
$Pol1=\'Elever,NT ,LAN ,HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\Explorer,NoFavoritesMenu,1\'
$Pol2=\'Elever,NT ,LAN ,HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\Explorer,NoSetFolders,1\'
$Pol3=\'Elever,NT ,LAN ,HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\Explorer,NoRun,1\'
$Pol4=\'Elever,NT ,LAN ,HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\Explorer,NoDeletePrinter,1\'
$Pol5=\'Elever,NT ,LAN ,HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\System,DisableRegistryTools,1\'
$Pol6=\'Elever,NT ,LAN ,HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\System,NoConfigPage,1\'
$Pol7=\'Elever,NT ,LAN ,HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\WinOldApp,Disabled,1\'
$Pol8=\'Elever,NT ,LAN ,HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Policies\\Explorer,NoSetFolders,1\'
$Pol9=\'\'
$Pol10=\'\'

;[Internet]
$nInet=\'1\'
$Inet1=\'Elever,NT ,LAN ,www.sine.dk,www.jubii.dk,e:\\backup\\download\\,No,,,No,\'
$Inet2=\'\'
$Inet3=\'\'
$Inet4=\'\'
$Inet5=\'\'
$Inet6=\'\'
$Inet7=\'\'
$Inet8=\'\'
$Inet9=\'\'
$Inet10=\'\'
$RemoveICW=\'1\'
$RemoveIE4Tour=\'1\'
$RemoveICB=\'0\'

;[MAPI]
$nMAPI=\'0\'
$MAPI1=\'\'
$CreateMAPIprofiles=\'0\'
$CreateMAPIgroup=\'\'
$ProfileTemplateFile=\'exchprof.prf\'
$ProfileName=\'$FullName\'
$MailboxName=\'$FullName\'
$ExchServer=\'\'
$OverwriteProfile=\'0\'
$EmptyWasteBasket=\'0\'
$SetupPAB=\'0\'
$SetupPST=\'0\'
$PersonalFolder=\'\'
$PABfilename=\'$UserID.PAB\'
$PSTfilename=\'$UserID.PST\'
$SetupOST=\'0\'
$SetupOAB=\'0\'
$OfflineFolder=\'\'
$OSTfilename=\'$UserID.OST\'
$OLenableBar=\'-1\'
$OLenableFolder=\'-1\'
$OutlookToday=\'-1\'
$OLSpellCheck=\'-1\'
$OLSpellIgNum=\'-1\'
$OLSpellIgUpper=\'-1\'

;[Program Launcher]
$nPL=\'0\'
$PL1=\'\'
$PL2=\'\'
$PL3=\'\'
$PL4=\'\'
$PL5=\'\'
$PL6=\'\'
$PL7=\'\'
$PL8=\'\'
$PL9=\'\'
$PL10=\'\'

;[Message Boxes]
$nMB=\'0\'
$MB1=\'\'
$MB2=\'\'
$MB3=\'\'
$MB4=\'\'
$MB5=\'\'
$MB6=\'\'
$MB7=\'\'
$MB8=\'\'
$MB9=\'\'
$MB10=\'\'

;[Registry]
$nReg=\'0\'
$Reg1=\'\'
$Reg2=\'\'
$Reg3=\'\'
$Reg4=\'\'
$Reg5=\'\'
$Reg6=\'\'
$Reg7=\'\'
$Reg8=\'\'
$Reg9=\'\'
$Reg10=\'\'

;[Logging]
$nLog=\'14\'
$LogShare=\'\\\\NT_SINE\\LOGS$\'
$RetainLogFileMonths=\'0\'
$Log1=\'$Date\'
$Log2=\'$Time\'
$Log3=\'$Lserver\'
$Log4=\'$WkSta\'
$Log5=\'$VerboseOS\'
$Log6=\'$OSCSDVersion\'
$Log7=\'$IPaddr\'
$Log8=\'$MACaddr\'
$Log9=\'$UserID\'
$Log10=\'$FullName\'
$Log11=\'$Priv/$LocalPriv\'
$Log12=\'$ConnType\'
$Log13=\'$SystemDrive $FreeSpace\'
$Log14=\'$SID\'

RETURN ; ** Last line of file - Do not remove

Powel hvad skulle jeg kunne finde derinde?

Jeg har været derinde før, men jeg kan ikke lige finde det derinde som jeg skal bruge!

er det ikke meningen at den fil du har fået lavet skal bruges sammen med Kix32 i NT ??
Af samme årsag tvivler jeg på at den fil kan \"oversættes\" direkte med mindre ScriptLogic har en SaveAs option ?

Jeg ved ikke noget om KIX og heller ikke om scriptlogic, jeg ved bare at vi havde siddet og lavet de opsætninger, men så ved jeg ikke hvad jeg skal gøre med dem! eller hvordan de skal executes!

Jeg er næsten sikker på at en del af løsningen ligger her, for din kode ligner virkelig kickstart source!:

Installing KiXtart
To install KiXtart, install the Windows NT Server Resource Kit. To do so, run Setup.exe from the Resource Kit CD-ROM.

NOTE: When you install the Windows NT Server Resource Kit, the KiXtart program files are placed in the Ntreskit\\Kix95 directory.

Jeg har allerede installere Kix32 så den skulle være der... jeg mangler bare at få den fil til at virke!

Jeg har desværre ikke mulighed for at lege med kix32, hvad skriver den hvis du starter kix32.exe fra en prompt med enten:
kix32.exe
eller
kix32.exe /?

For det bør blot være et spørgsmål om at få kix32 til at starte scriptet op...et gæt: kix32 -scriptnavn.kix

Der sker ikke noget hvis jeg skriver, start,kør;kix32

hmmm, det bedste jeg lige kunne finde er det her:
drev:\\kix32.exe script.scr

taget ud fra:

Use User Manager to create a new user with the Username of USER .

Enter the file name Script1.bat in the Logon Script Name dialog box.

Using a text editor such as Notepad, create Script1.bat with the following contents:
@ECHO OFF Z:\\kix32.exe script1.scr EXIT


Using a text editor such as Notepad, create Script1.scr with the following contents:
? \"Setting DOS variables...\" SHELL \"winset.exe USERNAME=@USERID\" SHELL \"Winset.exe ADDRESS=@ADDRESS\" SHELL \"Winset.exe COMPUTER=@WKSTA\" SHELL \"Winset.exe DOMAIN=@DOMAIN\" SHELL \"Winset.exe COMMENT=@COMMENT\" SHELL \"Winset.exe FULLNAME=@FULLNAME\" SHELL \"Winset.exe HOMEDIR=@HOMEDIR\" SHELL \"Winset.exe HOMESHR=@HOMESHR\" SHELL \"Winset.exe LSERVER=@LSERVER\" SHELL \"Winset.exe PRIV=@PRIV\" ? \"Done.\" Call Macro.bat EXIT


Using a text editor such as Notepad, create Macro.bat with the following contents:
SHELL \"winset.exe USERNAME=@USERID\"

  BREAK ON        ;(re)set Ctrl-C/Break handling
  COLOR r+/n
  SMALL
  ? \"USER INFORMATION\"
  ?
  AT (4,4)
  \"HI, @userid\"
  ?
  AT (6,4)
  @FULLNAME        ;full name of current user
  ?
  AT (8,4)
  @COMMENT        ;user comment in User Manager
  ?
  SLEEP 10
  CLS
  ?
  COLOR g+/n
  ? \"WHAT TIME IS IT?\"
  ?
  ? @DAY\", \" @DATE
  ?
  ? @TIME
  ?
  ? \"This is the \" @WDAYNO \"the day of the week\"
  ?
  ? \"This is day Number \" @YDAYNO \" of \" @YEAR
  ?
  ? \"This is Day Number \" @MDAYNO \" of Month Number \" @MONTHNO
  ?
  ? @MONTH \", \" @YEAR
  ?
  SLEEP 10
  CLS
  ?
  ?
  COLOR m+/n
  ? \"COMPUTER INFORMATION\"
  ?
  ? \"MAC Address of your Network Card:\"
  ? @ADDRESS
  ?
  ? \"Netbios Computer Name:\"
  ? @WKSTA
  ?
  ? \"Version of Windows You are Running:\"
  ? \"1 = Windows NT,    2 = Windows 95\"
  ? @INWIN
  ?
  ? \"Your Operating System\'s Version Number:\"
  ? @DOS
  ?
  SLEEP 10
  CLS
  ?
  ?
  COLOR c+/n
  ? \"NETWORK INFORMATION\"
  ?
  ? \"Logon Domain Name:\"
  ? @DOMAIN
  ?
  ? \"Home Directory Location:\"
  ? @HOMESHR \"\\\" @HOMEDIR
  ?
  ? \"Directory Where Network Software Resides:\"
  ? @LANROOT
  ?
  SLEEP 10
  CLS
  ?
  COLOR y+/n
  ? \"Logon Server:\"
  ? @LSERVER ;logon server
  ?
  ? \"Drive That is Redirected to \\\\logonserver\\NETLOGON:\"
  ? @LDRIVE
  ?
  ? \"Network Software Version:\"
  ? @LM
  ?
  ? \"Your Password is \" @PWAGE \" Days Old.\"
  ? \"The Maximum Password Age is \" @MAXPWAGE \" Days.\"
  ? \"You Are Logged on With \" @PRIV \" Privileges.\"
  ?
  SLEEP 10
  CLS
  ?
  ?
  If INGROUP(\"Domain Admins\")
  DISPLAY \"Z:\\Admins.txt\"
  ELSE
  DISPLAY \"Z:\\Users.txt\"
  ENDIF
  SLEEP 3
  ?
  COLOR b+/n
  ? \"Thank you for Test Driving Version \" @KIX \" of...\"
  BIG
  ? \"KiXtart!!\"
  sleep 4
  SMALL
  MESSAGEBOX (\"This Concludes This Test of the KiXtart Logon Script!\",
      \"KiXtart\", 0)
  EXIT



Using a text editor such as Notepad, create Admins.txt with the following contents:
This is from the Admins.txt file.


Using a text editor such as Notepad, create \"Users.txt\" with the following contents:
This is from the Users.txt file.


Place the following files in the NETLOGON share of every domain controller:
Kix32.exe (Located on the Windows NT 4.0 Resource Kit CD-ROM) KIX32.DLL (Located on the Windows NT 4.0 Resource Kit CD-ROM) KIX16.DLL (Located on the Windows NT 4.0 Resource Kit CD-ROM) MSVCRT.DLL (Located on the Windows NT 4.0 CD-ROM) WINSET.EXE (Located on the Windows 95 CD-ROM) SCRIPT1.BAT (The file listed above in step 3) SCRIPT1.SCR (The file listed above in step 4) MACRO.BAT (The batch file called by Script1.scr) ADMINS.TXT USERS.TXT


Log on as FRED from the Windows 95 Client. The KiXtart script should now run.

Hmm jeg har ikke længere mulighed for at afprøve det du skrev. Jeg prøvede mange gange at få det til at virke, der hvor det skulle virke. Men uden held. Men siden du nu har givet så mange indlæg for du dine point...! ;-))