scsi card og asus P4p800 MB

prøv enten at installere nyeste drivere til kortet, såfremt det er nyeste du har brugt skal du prøve en ældre version

Event ID: 11
Source adpu160m 
Type Error 
Description The driver detected a controller error on \Device\Scsi\adpu160m1 

See Q154690 for a troubleshooting approach. Some contributors considered some of these errors as being caused by faulty SCSI devices attached to the controllers (i.e CD-ROM drives). Also you can check the cabling on the device named in the message. If the cabling is working satisfactorily and you continue to receive this message, run hardware diagnostics on the device. You might have to contact the vendor of the device for technical support, or you might have to replace the controller. The problem can be with the controller itself but most likely with the devices attached to it (like SCSI hardrives or tape drives).

taget fra http://www.eventid.net/display.asp?eventid=11&source=adpu160m

en sidste ting check evt om termiternigen er sat korrekt på dine scsi enheder og at rækkefølgen er korrekt sat

Prøv at trykke CTRL + A under opstart og sæt til DEFAULT i Adaptec SCSI Select, find ud af om SCSI-BIOS har registreret enheden - og check termineringen, som "levithan" nævner. Hvis dit DVD-drev har en Factory Default setting af SCSI-ID - så bør du nok lade den være uændret.