ANgive en begrænsning på eth0

Linux.org har en udførlig guide:
http://www.linux.org/docs/ldp/howto/Bandwidth-Limiting-HOWTO/

Måske kan det være en hjælp!

--
Pacroon

Jeg har en 10mbit linje,
--------- 10mbit ------------
  |      |
2mbit    Etc
  |      |
ServerX  Etc

Hver server må max benytter 2mbit, det skal ikke gøres via en proxy.

Inbond:

                  tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 10mbit

      tc class add dev eth0 parent 1: classid 1:1 cbq rate 128kbit \
      allot 1500 prio 5 bounded isolated

      tc filter add dev eth0 parent 1: protocol ip prio 16 u32 \
      match ip dst 192.168.0.0/24 flowid 1:1


                  Outbond:

                  tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 10mbit

      tc class add dev eth0 parent 1: classid 1:1 cbq rate 128kbit \
      allot 1500 prio 5 bounded isolated

      tc filter add dev eth0 parent 1: protocol ip prio 16 u32 \
      match ip dst 192.168.0.0/24 flowid 1:1


The easyest way:
cbq.init script or htb.init

Configuring CBQ can be a bit daunting, especially if all you want to do is shape some computers behind a router. CBQ.init can help you configure Linux with a simplified syntax.

For example, if you want all computers in your 192.168.1.0/24 subnet (on 10mbit eth1) to be limited to 28kbit/s download speed, put this in the CBQ.init configuration file:


DEVICE=eth1,10Mbit,1Mbit
RATE=28Kbit
WEIGHT=2Kbit
PRIO=5
RULE=192.168.1.0/24


htb.init

http://sourceforge.net/projects/htbinit/



tyvstjålet fra http://www.experts-exchange.com/Networking/Linux_Networking/Q_20819743.html

eller bare brug Windowshaper scriptet.. Er nok nemmere når alt kommer til alt:
http://lartc.org/wondershaper/

grrr damn. Wondershaper, IKKE Windowshaper =(((