emule spørsmål.

det betyder at der er ingen der har filen og 0 (1) betyder at der er én der har den men at man ikke kan downloade fra vedkommende

/Christian

togsverd1985: Det er ikke helt korrekt.

F.eks.: 10/21 (3)

Det betyder at der er 21 der har filen. 10 har noget af filen som du kan bruge og 3 betyder at du lige nu henter noget af den fil fra 3 forskellige brugere.

Ref.: http://www.emule-project.net/faq/progress.htm - Source count.

Snowball

Men det forklare jo ikke hvorfor jeg ikke kan hente filen fra min ven selvom vi begge to er på og har tændt for emule . ?

Hvis du ikke har særlig høj id (ikke har åbnet de rigtige porte) så kan du kun downloade begrænset fra folk der har high ID, dvs. hvis din ven også har lav id så er det næsten umuligt for jer at downloade fra hinanden.

) Local Port: 4662
  Remote Port: any
  Protocol: TCP 
  Direction: incoming
  Purpose: Client Port / Connections from other clients, Client to Client Source Exchange

  Note: You can change this port in Preferences -> Connection -> Client Port
This port has to be forwarded in a router. Changing this port in Preferences you must also change the forwarding in the router



2) Local Port: any
  Remote Port: 4662
  Protocol: TCP 
  Direction: outgoing
  Purpose: Client Port / Connections to other clients, Client to Client Source Exchange

  Note: 4662 is the default port, but other clients may have different settings. Change the remote port to any when configuring a firewall



3) Local Port: 4672
  Remote Port: any
  Protocol: UDP
  Direction: incoming
  Purpose: Clients source asking / extended eMule protocol, Queue Rating, File Reask Ping

  Note: This port has to be forwarded in a router. Changing this port in Preferences you must also change the forwarding in the router.
If you are not able to forward this port check the disable box in Preferences -> Connection -> UDP Port



4) Local Port: any
  Remote Port: 4672
  Protocol: UDP
  Direction: outgoing
  Purpose: Clients source asking / extended eMule protocol, Queue Rating, File Reask Ping

  Note: 4672 is the default port, but other clients may have different settings. Change the remote port to any when configuring a firewall

5) Local Port: any
  Remote Port: 4661
  Protocol: TCP 
  Direction: outgoing
  Purpose: Connection to server


  Note: 4661 is the default port of a server. Many server use different ports. Configuring a firewall the remote port again changes to any.



6) Local Port: any
  Remote Port: 4665
  Protocol: UDP
  Direction: outgoing / (incoming)
  Purpose: Source asking on servers , searching for files
  Note: Servers using the default port 4661 TCP (see #5) automatically set their port for source asking to 4665 UDP. If a server uses a different port in #5 the corresponding UDP port is set to [Connection Port + 4]. For firewalls the remote port here is any.

UDP is a connectionless protocol, i.e. unlike TCP no connection is kept alive. If a server answers e.g. a source request this answer is treated as a new connection. All commonly used routers and firewalls in the home computer sector perform an UDP connection tracking therefore it is not necessary to specify an incoming port for UDP in the router's or firewall's configuration. More complex networks, especially if proxy servers are used, may require to define this local port to configure the router / firewall / proxy accordingly or to disable it at all if it is not possible to control them. It is possible to set this port in Preferences -> Preferences.ini but there is usually no need to change it.


7) Local Port: 4711
  Remote Port: any
  Protocol: TCP
  Direction: incoming
  Purpose: Web Interface
  Note: This is the default port for the web interface. When using a router this port has to be forwarded or no connection to the web interface will be possible.