Office97 PRO uten Access-lisens?

prøv denne kode:
0402 - 3576777
eller
1112-1111111

skulle virke :=}

har du tidligere installeret Office 2000 på maskinen ?

Eller har du følgende font installeret Hatten.ttf
også kendt som \"Hattenschweiler\"

Her kan problemet ligge (underligt nok)
mvh martens

Nå ja .... paster lige en artikel, som jeg fandt på en af mine diske (PC-guide/access ......)

------ START - >
ACC2000: How to Install Access 97 and Access 2000 on the Same Computer

--------------------------------------------------------------------------------
The information in this article applies to:

Microsoft Access 2000

--------------------------------------------------------------------------------
Moderate: Requires basic macro, coding, and interoperability skills.



SUMMARY
This article discusses how to install Access 97 and Access 2000 on the same computer.



MORE INFORMATION
How you install Access 97 and Access 2000 on the same computer depends on whether one of the versions is already installed or whether neither is installed. The following installation instructions cover all scenarios:


Neither Access 97 nor Access 2000 Is Installed
Access 97 Is Already Installed
Access 2000 Is Already Installed
If you have already installed Access 97 and Access 2000 on the same computer and are having problems, see the Problems After Installing Access 97 and Access 2000 on the Same Computer section of this article.
Neither Access 97 nor Access 2000 Is Installed
If neither Access 97 nor Access 2000 is installed, install Access 97 first, and then install Access 2000. Because by default both versions of Access are installed in the same folder, you must perform a custom installation when you install Access 2000 so that Access 2000 does not overwrite Access 97.
Install Access 97 or Office 97. You can select either a Typical or a Custom installation.


Install Access 2000 or Office 2000, but you must select a Custom installation.


When prompted, change the installation location for Access 2000 or Office 2000 to a folder other than C:\\Program Files\\Microsoft Office\\ or the folder that you installed Access 97 or Office 97 into. For example, you can install Access 2000 or Office 2000 to a folder named C:\\Program Files\\Microsoft Office2K\\


When prompted, select the option to keep the earlier versions of the Office programs on the computer. This is an all-or-nothing selection; you either keep all earlier versions of the Office programs, or you lose them all.


Complete the rest of the installation.

NOTE: The Office 97 shortcuts on the Start menu will be overwritten by the Office 2000 shortcuts. If you want Office 97 shortcuts on the Start menu, you must add them manually.


Access 97 Is Already Installed
If you already have Access 97 on the computer, and you want to add Access 2000, follow these steps:

Install Access 2000 or Office 2000. Be sure to select the Custom installation option.


When prompted, change the installation location for Access 2000 or Office 2000 to a folder other than C:\\Program Files\\Microsoft Office\\ or the folder that you installed Access 97 or Office 97 into. For example, you can install Access 2000 or Office 2000 to a folder named C:\\Program Files\\Microsoft Office2K\\


When prompted, select the option to keep the earlier versions of the Office programs on the computer. This is an all-or-nothing choice; you either keep all earlier versions of the Office programs, or you lose them all.


Complete the rest of the installation.

NOTE: The Office 97 shortcuts on the Start menu will be overwritten by the Office 2000 shortcuts. If you want Office 97 shortcuts on the Start menu, you must add them manually.




Access 2000 Is Already Installed
If you already have Access 2000 on the computer, and you want to add Access 97, there are some additional steps you must follow.

When you try to install Access 97, you have to avoid the \"No license...\" error message caused by the presence of the Hatten font, which is installed by Access 2000 and Office 2000. Also, if the Access 97 installation finds a newer version of the Msaccess.exe file on the computer, it will not install the 97 version of the Msaccess.exe file.

Click Start, point to Find, and then click Files or Folders.


Find the Hatten.ttf file, and then rename it to Hatten.sav. You must do this to avoid the \"No license...\" error message when you start Access 97.

NOTE: You can find the Hatten.ttf file in the Fonts folder under the name, Haettenschweiler.


Find the existing version of the Msaccess.exe file, and then rename it to Msaccess.2k. Before you rename it, confirm that the version of the Msaccess.exe file is 9.0x by right-clicking the file, and then clicking Properties. Then click the Version tab


Install Access 97 or Office 97.


When prompted, click Change Directory to install Access 97 in a folder other than the folder in which Access 2000 is installed. For example, install the program in a folder named C:\\Program Files\\Microsoft Office97\\.


After the installation is finished, find the Msaccess.2k file and rename it back to Msaccess.exe. Also, find the Hatten.sav file and rename it back to Hatten.ttf. 

---- E N D --- <

Desværre kan jeg ikke lave bogmærker her på eksperten,-  Men læs lige dette (uddrag af ovenstående....) - Det er jo netop det, der er galt
----
When you try to install Access 97, you have to avoid the \"No license...\" error message caused by the presence of the Hatten font, which is installed by Access 2000 and Office 2000. Also, if the Access 97 installation finds a newer version of the Msaccess.exe file on the computer, it will not install the 97 version of the Msaccess.exe file.

mvh martens

codebase: You\'re too kind – way too kind.
Jeg har en gyldig kode, og installasjonen selv går også greit. Det er først når jeg starter Access at den klager på manglende lisens.

martens:
Ja, jeg har hatt Word2000 installert en periode – dette ser lovende ut, jeg skal se om jeg får testet videre til kvelden.

(Installerte W2k i håp om at \"save as Unicode\" skulle bruke UTF-8, der W97 bruker UTF-16. Negativt. Ingen \"save as Unicode\" i det hele tatt. Dessuten mislikte jeg politikken med at \'jomfruelige\' menypunkter er usynlige, jeg syntes ikonene var stygge å se på, kort sagt lengtet jeg tilbake til Office97.)

Der er en bug i enten access eller Windows der gør at licencen ikke bliver godtaget
Jeg har en lille program udgivet af MS som klare det lille problem.
så skriv din mail adr så skal jeg sende den.

PoulH

dit problem løses nu! Læs selv:

ACC: \"There Is No License\" Error Message Starting Microsoft Access
IMPORTANT: This article contains information about editing the registry. Before you edit the registry, make sure you understand how to restore it if a problem occurs. For information about how to do this, view the \"Restoring the Registry\" Help topic in Regedit.exe or the \"Restoring a Registry Key\" Help topic in Regedt32.exe.

--------------------------------------------------------------------------------
The information in this article applies to:

Microsoft Access for Windows 95, version 7.0
Microsoft Access 97

--------------------------------------------------------------------------------
Novice: Requires knowledge of the user interface on single-user computers.



SYMPTOMS
When you start Microsoft Access 7.0 or 97, you may receive the following error message.



In Microsoft Access 97:
Microsoft Access can\'t start because there is no license for it on this machine.
-or-
Can\'t find the database you specified or you didn\'t specify a database at all.
In Microsoft Access 7.0:
Microsoft Access can\'t be started as there is no license for it on this machine.



CAUSE
There are two possible causes for this error message.

The most likely cause is that Microsoft Access is not properly registered on your computer. If Microsoft Access is not properly registered on your computer, please follow the steps in the \"Rename a Font, and Then Reinstall Microsoft Access\" section of the \"Resolution\" section of this article.

The second cause applies only to computers running Microsoft Windows NT 4.0 and Microsoft Windows 2000. On these operating systems, you may also receive this error message if you do not have Read permissions to the Licenses key in the registry. If this applies to you, please follow the steps in the \"No Read Permissions to Licenses Key\" section of the \"Resolutions\" section of this article.



RESOLUTION
NOTE: If you are running Microsoft Windows 98, you can download a tool that corrects the problem that is discussed in this article. IMPORTANT: If you are running any operating system other than Windows 98, this tool may not work correctly.

For additional information about downloading this tool, click the article number below to view the article in the Microsoft Knowledge Base:

Q191224 ACC97: AcLicn97.exe Available in Download Center
Rename a Font, and Then Reinstall Microsoft Access
NOTE: In the following steps, when you reinstall Microsoft Access 97 by using the Setup Maintenance Mode, you do not have to uninstall Microsoft Access first. This operation simply returns the computer to the installation state that it was in the last time that you ran Setup.

Follow these steps to correct the registry error.

NOTE: Because there are several versions of Windows, the following steps may be different on your computer. If they are, please consult your product documentation to complete these steps.
If you are running Microsoft Windows Millennium Edition, follow the steps in the Steps for Microsoft Windows Millenium section later in this article.
Quit all Microsoft Office programs that may be running on your computer.


On the Start menu, point to Find, and then click Files or Folders.


In the Named box, type hatten.ttf.


In the Look in box, type C:\\Windows\\Fonts.

NOTE: The path to the Fonts folder may be different on your computer.


Click Find Now to start the search.

If Hatten.ttf is not found, try searching for Haettenschweiler.ttf. Haettenschweiler is the full name of the Hatten font.


Under Name, right-click the hatten.ttf file, and then click Rename on the shortcut menu that appears.


Change the name of the file to hatten.xxx. If you receive a prompt that states that changing the extension may cause the file to become unusable, click Yes.


Minimize, but do not close, the Find dialog box.


On the Start Menu, point to Settings, and then click Control Panel.


In Control Panel, double-click Add/Remove Programs.


In the Add/Remove Program Properties dialog box, click the Install/Uninstall tab, and select Microsoft Office 97, Professional Edition in the program list.


Click Add/Remove to run Office Setup in Maintenance Mode.


In the Microsoft Office 97 Setup dialog box, click Reinstall.


After the reinstallation is finished, click the Find dialog box on the taskbar to maximize it.


Under Name, right-click the hatten.xxx file, and then click Rename on the shortcut menu that appears.


Change the name of the file back to hatten.ttf.


Microsoft Access should now be properly registered.
Steps for Microsoft Windows Millenium Edition
Quit all Microsoft Office programs that may be running on your computer.


Click Start, point to Programs, point to Accessories, and then click MS-DOS Prompt.


At the MS-DOS prompt, type cd fonts, and then press ENTER.


At the MS-DOS prompt, type ren hatten.ttf hatten.old, and then press ENTER.

NOTE: At this point, you may receive the message \"duplicate file name or file in use.\" If this is true, follow these steps in lieu of steps 1 through 4 to rename the font:


Restart the computer with the Startup disk in the floppy disk drive.


Choose option 4 for a Minimal Boot at the Startup screen.


At the MS-DOS prompt, type c:, and then press ENTER.


At the MS-DOS prompt, type cd windows\\fonts, and then press ENTER.


At the MS-DOS prompt, type ren hatten.ttf hatten.old, and then press ENTER.


Restart the computer.


Click Start, point to Settings, and then click Control Panel.


In Control Panel, double-click Add/Remove Programs.


In the Add/Remove Program Properties dialog box, click the Install/Uninstall tab, and then click Microsoft Office 97, Professional Edition in the program list.


Click Add/Remove to run Office Setup in Maintenance Mode.


In the Microsoft Office 97 Setup dialog box, click Reinstall.


Microsoft Access should now be properly registered.
No Read Permissions to Licenses Key
NOTE: The steps in this section apply only to computers that are running Microsoft Windows NT 4.0 or Microsoft Windows 2000.

When you are logged on as an administrator on a computer that is running Windows NT 4.0 or Windows 2000, you can use Registry Editor to check and to modify user permissions to the different registry keys.

WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

For information about how to edit the registry, view the \"Changing Keys and Values\" Help topic in Registry Editor (Regedit.exe) or the \"Add and Delete Information in the Registry\" and \"Edit Registry Data\" Help topics in Regedt32.exe. Note that you should back up the registry before you edit it. If you are running Windows NT or Windows 2000, you should also update your Emergency Repair Disk (ERD).

To check the user permissions, follow these steps:
Log on to the problem computer as an Administrator.


On the taskbar, click Start, and then click Run.


Type regedt32, and then click OK.


Select the \\\\HKEY_CLASSES_ROOT\\Licenses key.


On the Security menu, click Permissions.


Make sure that the necessary users and groups have at least Read permissions to the key.


Close Registry Editor and restart the computer.


When you log on as a typical user, you should now be able to start Microsoft Access without problems.



MORE INFORMATION
For additional information about how to install Access 97 and Access 2000 on the same computer, click the article number below to view the article in the Microsoft Knowledge Base:

Q241141 ACC2000: How to Install Access 97 and Access 2000 on the Same Computer

Additional query words: win98 acc97 acc95 prb icon errmsg err msg launch lisense cannot didn Microsoft Access can t start because there is no license for it on this machine

Keywords : kberrmsg kbsetup kbdta
Issue type : kbprb
Technology : kbAccessSearch



Last Reviewed: January 4, 2001
© 2001 Microsoft Corporation. All rights reserved. Terms of Use.

Martens\' løsning virket. Bare en liten snubletråd: I NT Stifinder kunne jeg ikke døpe om hatten.ttf. Stifinder \'vet\' at font-mappen ikke er en vanlig mappe, så den fjerner rename fra pop-up-menyen.

Jeg er over 40 år, så jeg burde sikkert kunne døpe om med en DOS-kommando. I stedet brukte jeg musa for å slepe hatten.ttf til en annen mappe. Så av- og re-installerte jeg Access97, og hentet hatten.ttf tilbake med
Control Panel/Fonts/File/Install New Font...

poulh og hotpop ser fornuftig ut, men jeg leste dem først etter at jeg hadde løst problemet.