Netværksprinter Hp Laserjet 4050TN

Den er indbygget.

Gå ind i menuen og giv den et IP nummer og netmaske på netværket.

Her er en vejledning til installation af driver:

How to install Win2K drivers for HP LaserJet 4050 N?
This installation needs an IP . Please ask them to Muruvet Hanim.
Download, self extract, unzip
start-settings-controlpanel
printers-add printer
Welcom to the Add printer Wizard - next
Local or Network Printer? Local printer next
Create Port- Standart TCP/IP Port next

Welcome to the Add Standart TCP/IP Printer Port Wizard - next
Add port enter the IP from muruvet hanim -next
Completing the Add Standard TCP/IP Printer Port Wizard - finish
Add Printer Wizard - Have Disk
Install from disk - browse to the directory where the extracted files placed
Choose HP LaserJet 4050 Series PCL 6 - next

Down-load necessary zipped-driver file appropriate to your system. It is a self-extracting-zip file.
Unzip file by executing it. It will ask for a directory name. Give new one or accept the one given.
Open 'Printers' in the 'Control Panel'. (Start->Control Panel->Printers)
Run the 'Add Printer' wizard.
Click 'next' for 'Welcome to the Add printer Wizard'
Choose 'Local printer' and click 'next' for 'Local or Network Printer?'
Choose 'Standard TCP/IP Port' from pull down menu and click 'next' for 'Create Port'
(A new wizard starts) Click 'next' for 'Welcome to the Add Standard TCP/IP Printer Port Wizard'
Enter the IP from muruvet hanim and click 'next' for 'Add port'
Click 'finish' for 'Completing the Add Standard TCP/IP Printer Port Wizard' to close the new wizard.
Choose 'Have Disk' for 'Add Printer Wizard'
Browse to the directory where the extracted files placed for 'Install from disk' and click 'ok'
Choose 'HP LaserJet 4050 Series PCL 6' and click 'next'
Next, next, finish ( note that default selections in those dialogs are ok but you can change as you wish).

Du kan udskrive en konfigurations side for at se dit opsætnign således:

1. Press Menu until INFORMATION MENU appears on the printer display.
2. Press Item until PRINT CONFIGURATION appears on the panel.
3. Press Select to print out a configuration page.

kan du ikke lige stikke mig et link til den guide der, det er lidt svært at downloade noget man ik aner hvor ligger ;)

Indstilling af IP adresse på printer:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&taskId=115&prodSeriesId=25475&prodTypeId=18972&objectID=bpj02326


HP LaserJet 4000, 4050, 4100, 4500, 4550, 5Si, 5SiMX, 5000, 5100, 8500, 8550, 8000, 8150 printers, HP 2500c Professional series, HP Business Inkjet 2200, 2250, and 2600 printers
To configure TCP/IP parameters from the control panel, use the following instructions:


Press the MENU button until HP MIO 1 (or 2), or HP EIO 1 (or 2) appears.

Press the ITEM button until CFG NETWORK = NO appears.

Press the PLUS or VALUE button until CFG NETWORK = YES appears.



NOTE: The CFG NETWORK = XXX (XXX being YES or NO) is a toggle, not a permanent setting. Changing it to YES allows the settings to be changed at that time. It will appear as CFG NETWORK = NO each time this menu is accessed.

Press SELECT or RESUME.

Press ITEM repeatedly until CFG TCP/IP = NO appears.

Press the PLUS or VALUE button until CFG TCP/IP = YES appears.



NOTE: The CFG TCP/IP = XXX (XXX being YES or NO) is a toggle, not a permanent setting. Changing it to YES allows the settings to be changed at that time. It will appear as CFG TCP/IP = NO each time this menu is accessed.

Press SELECT or RESUME.

Press the ITEM repeatedly until BOOTP = YES* appears.

Press the PLUS or VALUE button until BOOTP = NO appears.



NOTE: When using BootP or DHCP, keep the setting BOOTP = YES *. The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect. No other TCP/IP configuring is necessary.

Press SELECT or RESUME.

The following two steps apply to the HP Jetdirect 610n cards only:

DHCP=YES appears.

Press the PLUS or VALUE button until DHCP = NO appears.



NOTE: When using DHCP, keep the setting DHCP = YES *. The DHCP server will configure the TCP/IP parameters on the HP Jetdirect. No other TCP/IP configuring is necessary.

Press SELECT or RESUME.

Press ITEM until IP BYTE 1 = (value*) appears.

Press the PLUS or VALUE button, until the desired value of the first byte of the IP address appears. By pressing and holding the PLUS or VALUE button, the value will scroll rapidly (HP LaserJet 4000, 5000, and 8000 printers have a MINUS button to decrease the value).

Press SELECT or RESUME to save the value.

Press ITEM to continue. Repeat Steps 11-13 to configure the remaining bytes of the IP address.

Repeat Steps 11-13 to configure the subnet mask bytes (SM BYTE 1=), syslog server IP address (LG BYTE 1=), default gateway (GW BYTE 1=), and timeout (TIMEOUT=).

Press ONLINE, GO or MENU. Print a self-test page to verify the IP settings.

If the test page does not show the correct settings, power cycle the printer and reprint the test page.

Driver installationen er fundet på: http://www.ee.bilkent.edu.tr/misc/

Jeg har en IP adresse samt en undernetmaske... Men når jeg går ind i menuen og sætter den til at være netværksprinter slår den automatisk over på 'Nej' igen...

Ip'en har jeg fra den udprintede konfigurationsside.

ja, nu virker det.. tak for svaret! :)

Hvordan fik du det til at virke? jeg har en hp 4500 og jeg kan komme ind på den via http men når jeg tilføjer ip på printeren under "tilføj printer" så kommer den med en fejl.